Recent content by Danworkshop

I have used the silver bullet pro jig and suspected it to be off a bit. I verified my suspicions using gage pins, engineer squares and 1-2-3 blocks. The 3 degree holes are not straight across from each other, off by .006" and one side has a toe in/out issue. Very disappointed considering the...

Pony express, when you tested RR vs. Legend, was this the New Age Legend/PTFE in the bottle or the Legend in the can?

I could have let the Derby Worx wax cure longer but i suspect it wouldn't have provided a positive gain with the lube combo I was using. I have conducted tests between Max-V graphite by itself vs. Derby Worx wax treatment with Max-V, data showed an average gain in the later by about .009, if I...

For the test between max-v, K-100 and K-100 Blend, I preped axels through 12k grit and finished with green liquid polish by DD4H. Preped wheels by balancing, polishing inside bore and hubs with novus 1, 2 & 3, rinsed with 91% alcohol, put layer of graphite on inside wheel rim only (was very...

I recently tested the diffrence between max-V graphite and krytox-100. My results showed that Krytox-100 was faster by an average of .033 or half a car length. I also found that Krytox-100 Blend (DD4H product) was faster than regular Krytox-100 by an average of .007. The K-Blend was advertised...