Recent content by Old Geeezer

FYI: Thin nylon fishing line around the axle head works in a pinch also. Saved my bacon and a set of wheels a couple of times.

From one Old Geeezer to another, We are praying for a speedy recovery. Take care my friend.

+ 1 Always

Use with 91% alcohol

This is what the product looks like, I have had good luck finding it on the clearance table at Pep Boys Auto Stores in the Phoenix area. It usually is maked down 50%.

It is not the same as jig, Some of the Pep Boy's and Menards still have Jigaloo.

Skip the Champ timer and go with the K3 Microwizard Timer, it is a much better timer.

The weight stays the same on your DFW no matter how much steer you put into the car. You can prove this out by adjusting DFW for say 7 inches of steer then weighing the car with a scale on each wheel then set steer for 2 or 3 inches of steer and weigh the car again, it will not change. The...

+1

Are you using a micrometer or caliper to measure axles. The eliminaor axles measure .0845 with a micrometer.

1 large white and 1 large grey

Just rechecked my boxes etc. nothing here..........

Planning on being there live also, Wife and I are heading that way in the Motorhome about the 7th of June. We are going to spend some time at Zion and Bryce on the way up from Phoenix.

I have some, let me know what length & width you want and where to send it. I have .007 & .014 thickness in nondirectional and .008 in twill pattern.

Positive cant and No drilled cant. Really strange you can watch the wheel visually point in on the front side of wheel (9 o'clock position) go thru straight (12 o"clock) and then point in on the rear side of wheel (3 o"clock) while turning axle with the car in your hand. All while the wheel has...