New Items IceCap Collection

[The Iceman]

Introducing the Ice Cap Collection, Special thanks to Brian (Huricrane) for testing and racing my original design. (.003 -005 increase)

PM me for orders

Notes:
a. as soon as I get the dimensions I'll make sets for The Predator 2.0 v2
b. note the location for washers
c. note the angle each are made to match the front and rear wheel angles.
d. Front wheel caps should be turned to match the angle.
e. all are optically clear!

1. Scout IceCaps - $28 for set = 3 standard and 1 (front) unidirectional).
Fits: fits all wheels but a little loose for MA and intimid8rs.
Notes:
a. Caps tilt at about 3 degrees to match the wheel.
b. Take $2.50 off any additional sets ordered.

Pics = back and front

2. Pro IceCaps (reversed wheel) Pulled - Professional Courtesy

3. Weight IceCaps - $28 for set. = 2 wheel weight IceCaps, 1 front and one Wheel cover (your choice inner or outer).
Fits: (puma weights, small and large) wheel = MA, Intimid8rs, Pro Inertia and Pro Ultra lites. (Predator 2.0 V2 not tested, looks like they will)
Notes:
a. weight caps width =1.015" Front = 1.034"
b. front is @ 5 degree to match the wheel
c. Take $2.50 off any additional sets ordered.

Pics = back and front

4. Covers IceCaps. $16.00 for set of 2. Your choice (inner or outer)
Fits: all wheels
Note:
a. if no indication of what to send, one of each will be sent.
b. Take $2.50 off any additional sets ordered.

Pics= Outer and inner

 

[BulldogRacing]

These look Hot Ice Man!

 

[aircooled]

Those covers sure look great!!! Outstanding craftsmanship!!!! They look perfect for Mid-America!!!

 

[derbychip]

Order placed

 

[Choo Choo]

Introducing the Ice Cap Collection, Special thanks to Brian (Huricrane) for testing and racing my design. (.003 -005 increase)

Notes:
a. as soon as I get the dimensions I'll make sets for The Predator 2.0 v2
b. note the location for washers
c. note the angle each are made to match the front and rear wheel angles.
d. Front wheel caps should be turned to match the angle.

1. Scout IceCaps - $28 for set = 3 standard and 1 (front) unidirectional).
Fits: fits all wheels but a little loose for MA and intimid8rs.
Notes:
a. Caps tilt at about 3 degrees to match the wheel.
b. Take $2.50 off any additional sets ordered.

Pics = back and front

2. Pro IceCaps (reversed wheel) - $28 for set= 4 rear and 1 front
Fits: MA, Intimid8rs, Pro Inertia and Pro Ultra lites
Note:
a. Front is at 5 degrees to match the front wheel angle.
b. I've also added the extra set because the drill/epoxy method is for the more skilled builders.
c. To install= Directions at bottom.
d. Take $2.50 off any additional sets ordered.

Pics = back and front

3. Weight IceCaps - $28 for set. = 2 wheel weight IceCaps, 1 front and one Wheel cover (your choice inner or outer).
Fits: (puma weights, small and large) wheel = MA, Intimid8rs, Pro Inertia and Pro Ultra lites. (Predator 2.0 V2 not tested, looks like they will)
Notes:
a. weight caps width =1.015" Front = 1.034"
b. front is @ 5 degree to match the wheel
c. Take $2.50 off any additional sets ordered.

Pics = back and front

4. Covers IceCaps. $16.00 for set of 2. Your choice (inner or outer)
Fits: all wheels
Note:
a. if no indication of what to send, one of each will be sent.
b. Take $2.50 off any additional sets ordered.

Pics= Outer and inner

Pro IceCap install directions:

1. drill a 1/4" block of wood with your axle bit.
2. drill your cap cover with your axle bit. (I like to put a small piece of wood under the cap)
3. drill your cap again with 3/16. (I like to put a small piece of wood under the cap)
4. insert your axle through the cover and then insert into the block of wood.
5. pull down slightly, till tight and spin axle to center.
6. I use Loctite Epoxy and a toothpick and dab around the head.
7. when it starts to setup push axle back through to relieve pressure.
8. let dry.

Great to see options for non D4 SS wheels.
Are they optically clear so the wheel info can be read?
Will they fit Space Walker Basico wheels?
What e-mail for Paypal to order?

Thanks,
Matt aka Choo-Choo Cacing

 

[The Iceman]

Hey Matt,

Yes they are optically clear! I'm not sure about Space Walker Basico wheels? If you PM me the inside width and I'll check. And you can just PM me for the order.

Thanks
Shawn

 

[B_Regal Racing]

Look what the cat dragged in. Hey Shawn....racin' again?

 

[The Iceman]

Look what the cat dragged in. Hey Shawn....racin' again?

Hey B, Oh really never stopped, might start sending in again. How is the Family?? You guys coming down for MA again? Family and Mid America keeping me busy. Next two weekends I'll have my garage filled with scouts working on PWD cars. Last year had 10 dads and boys, this year I think we are up to 20 plus.

Shawn

 

[B_Regal Racing]

<thread jacking on>

I am (or at least planning to). I do the same an open up the garage to the scouts so they can build their cars. At the same time, I started building my own for the next NPWDRL series. Christmas time gets busy and I tend to drop off from PWD racing in the winter months.

</thread jacking off>