4 on the floor rail runner

[Charles Studer]

Should be about 1 gram all they way dominant side with the foil or tape cover

 

[DerbyDad4Hire]

Better make sure the front is more narrow than the rear. I would move some weight forward. You might have a wild one there.

 

[cara424]

Is that a dimple on the front left inner hub?

Not sure, I”ll have to go check

 

[cara424]

Better make sure the front is more narrow than the rear. I would move some weight forward. You might have a wild one there.

Ran pretty good during our trial run. Was hoping for some faster numbers though

 

[Castoro Racing]

Any video? Otherwise fron the pictures you needed to close wheel gap, clean wheels like chuck said and cover weight pocket did you do that?

 

[Castoro Racing]

Was anyone else tuning their cars to compare?

 

[cara424]

IMO I would bump up the steer to at least 4 inches.

How did you set your gaps, did you use a gaping tool, calipers or eyeball?

Question... Do I base my steer on how far my dominate wheel drifts, or the center of the car. As of now, my drift of 3 inches is from the outside edge of thr rfw.

 

[cara424]

Any video? Otherwise fron the pictures you needed to close wheel gap, clean wheels like chuck said and cover weight pocket did you do that?

Working on the wheel gap, I already glued the axels because they were so touchy and one was very loose. I did cover weight pocket. My video looks bad so its to hard to analyze.

 

[cara424]

Was anyone else tuning their cars to compare?

Yes... looks like we are geared for first or second place although our champ from last year wasn’t present at trials. Best time last year was 3.12. from his car. I really want to try to get to that time to give us a chance at districts.