When Billy slaughters a hog the only thing he loses is the squeal. Everything else is fried, baked, roasted or pickled. And you thought bacon was born and raised in the cooler section where no animals were harmed.
So why waste parts of your Legend shipping box. A Forsner bit does an amazing job but for this system to work a hole saw must be acquired,
After the hole saw has done it's job remove the plug of foam from within the cutter and proceed as follows.
1. To keep the most graphite on the inner hub area burnish from side of plug first.
2. Using the patented RN4H hole, insert the inner hub and begin twisting wheel until burnishing is satisfactory****
3, Be sure to remove/blow off any loose foam particles
4. If using oil keep plugs and donate to youth groups where graphite is the only lube allowed,
Don't waste a thing !!
****For best results use the dual action technique by twisting hands in opposite directions
If you found this tutorial helpful please show your support by utilizing products suggested on this Forum !!
So why waste parts of your Legend shipping box. A Forsner bit does an amazing job but for this system to work a hole saw must be acquired,
After the hole saw has done it's job remove the plug of foam from within the cutter and proceed as follows.
1. To keep the most graphite on the inner hub area burnish from side of plug first.
2. Using the patented RN4H hole, insert the inner hub and begin twisting wheel until burnishing is satisfactory****
3, Be sure to remove/blow off any loose foam particles
4. If using oil keep plugs and donate to youth groups where graphite is the only lube allowed,
Don't waste a thing !!
****For best results use the dual action technique by twisting hands in opposite directions
If you found this tutorial helpful please show your support by utilizing products suggested on this Forum !!
Attachments
Last edited:
