Wheel Minimum Diameter 1.170 inches (will be checked with calipers)
Minimum Thread Width 7.5mm
No removing of any material to reduce weight
Lettering must remain on the inside and outside of the wheels
I don't think you can cut the wheel down to 1.170" without avoiding weight removal. The BASX or Rage should fill the requirement. The other wheels would be way too light of I read things correctly.
The rule looks contradictory. Minimum diameter but do not remove any weight.
Order the Rage and put a note for DD4H to cut to 1.170 OD..... You would do the same for the Cubby Class just write a note saying 1.180 OD. You will be slow with the BASX's in those classes.