This will be the largest payout event for any pinewood derby!!! $2200 worth of prizes!!!
The winners of each of the Man of the Mountain Championship classes will receive a $200 DerbyDad4Hire Gift Certificate!
We are also running 2 new classes open for anyone to compete in!
The winner for each class will receive a $100 DerbyDad4Hire Gift Certificate. Also for every car you enter into each special class it puts you in a drawing to win a COMPLETE BUILT UNLIMITED CAR by DerbyDad4Hire! One car for each class for a total of 2 Unlimited cars being given away!
The 2 new classes are:
Snail Wars
Battle of the Sunday Drivers!
Rules
Governor Class
Horsepower regulated race off!!!
Car Body ( the wooden/material structure that holds the weight, axles and other add ons)/ Total Car Dimensions
Wheel Base : Any as long as wheels do not exceed the 7" total length requirement
Total Car Height : Not to exceed 3" inches...
Total Car Length : Not to exceed 7" inches...
Total Car BODY Width : Not to exceed 2-3/4" inches...
Total Car Weight : Not to exceed 2.0 ounces (+.04) measured on 1/10th digital scale
Additional materials maybe added as long as they meet the rules
Wood must be used to construct your own body and/or frame
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Axles
a. Minimum diameter .084
b. Axles must have a nail head
Wheels
BSA
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. All markings must remain visible on the inside and outside of the wheel including tread bumps.
e. NO Wheel covers may be used
f. 8.00mm Minimum Tread Width
g. Wheels must weigh at least 2.4 grams and a wheel can be removed after the race to be weighed to confirm weight.
h. The wheels can be trued to get to the 2.4 gram weight but they are not to be cut down intentionally under the weight limit and use foreign material to bring it back to weight.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg (see photo below)
j. Propellants
The winners of each of the Man of the Mountain Championship classes will receive a $200 DerbyDad4Hire Gift Certificate!
We are also running 2 new classes open for anyone to compete in!
The winner for each class will receive a $100 DerbyDad4Hire Gift Certificate. Also for every car you enter into each special class it puts you in a drawing to win a COMPLETE BUILT UNLIMITED CAR by DerbyDad4Hire! One car for each class for a total of 2 Unlimited cars being given away!
The 2 new classes are:
Snail Wars
Battle of the Sunday Drivers!
Rules
- The SLOWEST TIME wins!
- Your car MUST cross the finish line in order to qualify for the slowest time !!
- DOUBLE ELIMINATION!
- Racing two cars at a time, one in each outside lane
- 5 ounce weight limit
- Any NPWDRL required wheels and axles are legal
- 9" total length
- 3-1/2" standing still width (Lane width is 3 1/2")
- Must clear under the Timer Tower.... 4 7/8" height clearance
- Your car must not need any NPWDRL assembly before race
- You can not use...
- Starting or finish line devices or propellants.
- Electronic or lighting devices
- Sharp Edged Glass
- Paint that rubs off, smudges or extremely sticky
- Sharp objects on the bottom of car. (We do not want any damage to the rubber stopping pads)
- Any part of the car to go beyond the starting peg.
- Sticky substances or anything on the car to aid with the starting peg, including the wheels.
- No dragging objects or any part of the car on the track. (other than the wheels)
Governor Class
Horsepower regulated race off!!!
Car Body ( the wooden/material structure that holds the weight, axles and other add ons)/ Total Car Dimensions
Wheel Base : Any as long as wheels do not exceed the 7" total length requirement
Total Car Height : Not to exceed 3" inches...
Total Car Length : Not to exceed 7" inches...
Total Car BODY Width : Not to exceed 2-3/4" inches...
Total Car Weight : Not to exceed 2.0 ounces (+.04) measured on 1/10th digital scale
Additional materials maybe added as long as they meet the rules
Wood must be used to construct your own body and/or frame
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Axles
a. Minimum diameter .084
b. Axles must have a nail head
Wheels
BSA
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. All markings must remain visible on the inside and outside of the wheel including tread bumps.
e. NO Wheel covers may be used
f. 8.00mm Minimum Tread Width
g. Wheels must weigh at least 2.4 grams and a wheel can be removed after the race to be weighed to confirm weight.
h. The wheels can be trued to get to the 2.4 gram weight but they are not to be cut down intentionally under the weight limit and use foreign material to bring it back to weight.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg (see photo below)
j. Propellants
