weight placement

[robsmi6522]

I ordered the burn out plug n play car from dd4h I have tungsten cubes for weights and was wondering what is the best setup for the weights how many behind the axle etc. Any suggestions would be great. Thanks

 

[Resophonic Racing]

minimum 10 behind the axle

 

[1reason]

minimum 10 behind the axle

If you're using a set COM, say 1 inch for the sake of argument, does it make any difference how much is in front of or behind the rear axle?

It would appear to me to be the same either way, but I've learned it's much better to ask than to assume.

 

[Obsessedderbydad]

I usually have 12 behind rear axle and depending on cut of car 9-10 infront

 

[speed bump]

Go to 5kids racing web page. Its has all u need to know about weight placement

 

[bracketracer]

If it's a plug & play car you might want to ask DD himself. I thought he posted one time to not put too many behind the rear axle or it will mess up the pre-set steer?

 

[TRE]

i put about 1.75 it was perfect

 

[STI45]

We put 2.0 oz. (12 1/4 inch cubes) and wiggled our way to first place overall in the pack race. So, I would recommend 10 1/4 inch cubes which is about 1.75 oz.